Using a replacement top spring from Moss created a problem in the way my BJ8
top fit when it was in the down position. Use 2 originals or 2 after market
matches.
Dan
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Alan Seigrist
Sent: Friday, December 24, 2010 8:28 AM
To: Healey
Subject: [Healeys] Poor fitting top?
All -
A recent post was about an ill fitting top. It should be said that you
need the correct springs for a BJ7 to hold the top in place:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190482675733#h
t_500wt_1182
Alan
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/dan@warner-associates.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|