Hi Bill,
No problem How about these pictures. It is a rectangular box like steel
bracket with an ear on one side that is secured to the left edge of the
alloy boot lid with 3 countersunk screws with washers and nuts. Many have
disappeared over the years due to the edge of the boot lid skin being
stressed around these screw holes and eventually cracking the area.
Rich Chrysler
Hundred Registrar
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of WILLIAM B LAWRENCE
Sent: Monday, December 27, 2010 4:39 PM
To: healeys@autox.team.net
Subject: [Healeys] Boot lid bracket
I'm working on the boot lid from my BN1. I have two alloy lids and neither
has
a stay bracket. I've looked at the Anderson-Moment book and I can see what
the
bracket and its attachment to the frame looks like for the steel lid, but
the
structure of the frame for the alloy lids I have are not the same. There is
no
reinforcement attached to the frame. Does anyone have an alloy lid with the
stay bracket attached and can I get a picture for reference?
Thanks.
Bill LawrenceBN1 #554
[demime 1.01d removed an attachment of type image/jpeg which had a name of
MVC-857S.JPG]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
April 06 pics 030.jpg]
[demime 1.01d removed an attachment of type image/jpeg which had a name of
April 06 pics 031.jpg]
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|