healeys
[Top] [All Lists]

Re: [Healeys] Carb. Fiber Washer Question - Jag - not healey

To: "'Jonas Payne'" <JPayne@ThorCon.net>, <healeys@autox.team.net>
Subject: Re: [Healeys] Carb. Fiber Washer Question - Jag - not healey
From: "Dave Porter" <frogeye@porterscustom.com>
Date: Sun, 12 Dec 2010 13:33:40 -0700
The fiber washers actually work quite well. They do require a couple re-
tightenings as they soften with the fuel contact. Make sure the ones you are
using are very close to the same thread diameter on their ID. Those 13/16"
[sic] 7/16 Whitworth fitting will take a surprising amount of torque. Don't
have any numbers but I'll guess I go over 50-60 ft lbs very often..
dave 

frogeye@porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

blog: http://porterbikes.com/


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Jonas Payne
Sent: Sunday, December 12, 2010 1:10 PM
To: healeys@autox.team.net
Subject: [Healeys] Carb. Fiber Washer Question - Jag - not healey

Working on the xk150 trying to resolve some leaking/seeping carb issues.

Is there some sort of gasket dressing that can be used to supplement the
fiber washers?

Car has one of those electric thermostatically controlled "starter
carbs" instead of a choke.

The car uses HD4's and the starter carb feeds off the bottom (where the
float bowl would be fastened with 4 screws on the HD8).

There are a total of 5 fiber washers used to connect this thing, and I
am leaking out of 4 of them.

I am a bit concerned about continuing to tighten the steel fitting into
the bottom of the aluminum carb in fear of stripping or cracking it.
(both on the main and starter carb)

Alternatively, apparently these elect starter carbs are such a problem
that I'm wondering if it may make more sense to fashion a manual choke.


Jonas Payne
PBR
Cell:   (702) 358-5084
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>