Noel, Camshaft bearings are not made in other than the "standard" size. Get a
another cam.
Richard Mayor
BN7L-466 Vintage Racer
Portland, Oregon
> Date: Sat, 27 Nov 2010 14:11:37 +1000
> From: hstandfa@iinet.net.au
> To: healeys@autox.team.net
> Subject: [Healeys] BN1 camshaft bearings
>
> I am restoring a 1954 BN1 and my engine rebuilder advised me I need 10
> thou under cam bearings as the cam journals have about 8 thou wear and
> require grinding, I can only find standard bearing sets listed with the
> usual suppliers but I believe oversize bearings are made somewhere, can
> anyone help with a supplier?
>
> thanks
>
> Noel Standfast
> AHOC Qld
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|