Listers,
I9d appreciate recommendations regarding acceptable endplay specs for my 64
BJ8 OD. During reassembly I found that the sun gear has 45 thousandths end
play. The factory manual recommends 8 to 14 thousandths. Elsewhere (Nelson
Riedel9s rebuild guide) has noted that 14 to 20 thousandths is acceptable.
How critical is endplay in this case?
I can9t find shims to make up the difference to meet the manual specs, so
should I make up a new bronze thrust washer to do this?
Thanks in advance and thanks for past help.
Tom
64 BJ8 in progress.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|