I'm glad to see that I'm not the only one that thinks outside the box, or
should
I say inside the distributor.
Don
BN1
OZ
________________________________
From: Len and/or Marge Hartnett
<thehartnetts@earthlink.net>
To: Healey Mail List <healeys@autox.team.net>
Sent: Sun, 31 October, 2010 4:02:26 PM
Subject: Re: [Healeys] Soda Blasting
Small Parts
The article on Pertronix wire chafing could be of interest to
those with
Pertronix installed. I was concerned about this problem when I
first installed
the unit on my Healey. My solution was to install a small
wire tie around the
wires inside the distributor right at the 'grommet' .
This prevents the wires
from ever being pulled through the grommet and
rubbing against the rotor.
(The Other) Len
Vacaville, CA, USA
1967 AH 3000
MkIII, HBJ8L39031
----- Original Message ----- From: "HealeyRick"
<healeyrick@yahoo.com>
To: <healeys@autox.team.net>;
<spridgets@autox.team.net>
Sent: Saturday, October 30, 2010 3:00 PM
Subject:
[Healeys] Soda Blasting Small Parts
> Saw this cheap DIY soda blaster on
another forum. Looks like it works great
> for carbs:
http://www.aircooledtech.com/tools-on-the-cheap/soda_blaster/
>
> Rick
_______________________________________________
Healeys@autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeynut@yahoo.com.au
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|