These are on the market. I bought one several years go but do not remember
where. Since I almost always buy this type of thing from British Car
Specialists, I would start there.
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Danny Eskenazi
Sent: Wednesday, October 20, 2010 1:25 PM
To: healeys@autox.team.net
Subject: [Healeys] I give up: how do I remove the differential drain plug?
Greetings,
I replaced the front seal in my BT7's differential and I thought topping it
off would be the easy part. Turns out not so! Some googling has revealed
that it is a 7/8" square drive plug. The only advice I've seen is to make my
own tool by grinding down a 1/2" drive extension to fit. Well, I don't have
a grinder. Surely there's an easier way? Doesn't SOMEONE make a tool for
this?
Thanks,
-Danny
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|