Need more info.
Is it a Girling servo or one of the aftermarkets? Did you do anything to the
master cylinder? Does the pedal return all the way?
With the Girlings, the M/C pushes a slave piston in the booster that actuates
an air/vacuum valve to activate the servo's main piston. If this valve doesn't
release for some reason the servo could continue to apply pressure to the wheel
cylinders.
My SWAG with the available data is something wrong with the new servo (IFF you
didn't mess with the M/C).
bs
--------------------------------
Bob Spidell - San Jose, CA
Hi List,
Looking for some feedback on problem.
I installed a new Brake Booster on my BJ8..works fine except when I take my
foot off the brake, there is a 5 or 10 second delay before the brakes
release entirely. Seems to hangup on both the front and back brakes.
Thanks for the help.
paul
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|