Well, you can tack them back on, or you can use a thin nut and cinch
them on the rail. I've done it both ways....
On 10/12/10, HealeyRick <healeyrick@yahoo.com> wrote:
> While removing the T nuts from the bottom of the seat rail, the studs
> passing
> from the bottom of the rail, through the floor and secured by the T nuts
> snapped off. They are flat headed. Anyone know a fix for this?
>
> Thanks,
>
> Rick
>
> Follow My Nasty Boy Build: http://tinyurl.com/yj52fwo
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|