?
Hi Guys
I have added a few pictures on HEALEY TECH at this web address
http://picasaweb.google.com/bj7healey
Bob 1963 BJ7
--------------------------------------------------
From: "Dave Porter" <frogeye@porterscustom.com>
Sent: Friday, October 01, 2010 6:56 PM
To: "'Ray Carbone'" <racarbon@verizon.net>; <healeys@autox.team.net>
Subject: Re: [Healeys] oil pressure relief valve
> It is and was duly pointed out by David Nock earlier.
> Dave..the other
>
>
> frogeye@porterscustom.com
>
> Porter Customs 2909 Arno NE
> Albuquerque, NM USA 87107
> 505-352-1378
> 1954 BN2 1959 AN5
> Porter Custom Bicycles
>
> cars:
> www.britishcarforum.com/portercustoms.html
> gallery:
> http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff
>
> blog: http://porterbikes.com/
>
> -----Original Message-----
>
>
>
>
>
> To contribute to the confusion, I decided to replace my original oil feed
> flex
> tube with a new one I had purchased a while ago from Victoria British. As
> with most replacements, this unit was far less substantial and I was
> tempted
> to reinstall the 47-year old original. When extracting the original, I
> inadvertently de-installed the adapter fitting attached to the engine and
> noted the very small orifice through which the oil would flow. Based upon
> this very small passage, I am lead to think that this orifice is the
> mechanism
> that the engineers intended to buffer out the pulsations to secure a
> steady
> gauge reading. Should this be the case, air must be bled from the tube
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/bj7ah@acanac.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|