In inches the measurements on my bracket are 2 3/8, 1 1/2 and 1
The cold air box has about 1/4 inch clearance from the frame without the 1/8
carburetor spacers.
The bracket is the original piece.
Regards,
Jim LeBlanc
1956 Factory M
--- On Mon, 9/27/10, Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>
wrote:
From: Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl>
Subject: [Healeys] offset bracket for the cold air box question
To: healeys@autox.team.net
Date: Monday, September 27, 2010, 6:45 AM
Hello,
Could any of 100M owners tell me how deep is the bracket offsetting the
left-hand shroud support?
Mine is 2" but I think it should be 2.75", otherwise the cold air box does
not clear the shroud support. There is also a possibility I am doing
something wrong..
Best, tadek
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jim_leblanc@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|