It's a bit too late for the answer, I suppose, but for the next time in a
similar situation, it would be nice to have at least one more idea than I had.
I removed my heater yesterday and I'm kind of wondering how one is supposed to
remove the washer from the stud that is accessible from the engine
compartment. I can only get one finger in there and I couldn't get needlenose
pliers in. So ... in my attempt, I dropped it inside the enclosed space. I'm
going to have to buy one of those magnets on a stick to get it out. :( There
seems to be a bunch of other debris in there also.
The nut was no problem and replacing the washer and nut should be no problem,
I suspect.
The colour of the coolant coming out of there was 'special'.
Robert Duquette
Ottawa ON Canada
1965 RHD BRG Austin-Healey Sprite ( project )
1967 RHD MG Midget ( aka: Miss Marple )
1955 Austin-Healey 100 BN1 ( aka: Carmen )
http://www3.sympatico.ca/robertduquette/temp/2009FallTour.jpg
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
