Double check the tongue for excessive wear. The one on my driver door was worn
to the point that it easily disengaged from the striker plate on the B
pillar.
Al Malin
Tricarb
On Sep 14, 2010, at 12:44 PM, Dan Stromquist wrote:
>
> rebuilt my door hinges recently on the bj8 and now have a problem with one
> door not shutting properly. driver side door has to be shut by putting it
a
> certain distance(approx 9 inches) then pulling it closed gently but not too
> gently or it will bounce back to the first detent. sometimes it takes
> multiple attempts at various distances and speed. have tried all different
> positions of the striker plate, but no luck. pax door works fine. the
door
> latch bushing does seem to have a little play, but it was no problem before
> i redid the hinges. any ideas? hjim
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/dan@warner-associates.com
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/amalin@mac.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|