Mark,
Just a WAG but maybe remove one or both of the hinges, mount the rack to the
pins, then reattach the hinges to the car?
Keith
---- Mark LaPierre <lapierrem@sbcglobal.net> wrote:
> Got a new Moss luggage rack that appears to be a wrong fit. I got my old
> hinge pins out and replaced them with the
> optional rack pins. These pins have a nut, a threaded area and the acorn
> nut. My question is where exactly do the rack
> tabs go in conjunction with the pin/ thread set up. The holes in the rack
> tabs are big enough to go over the threaded area but
> the tabs are not welded far enough apart to get them over both the left and
> the right threaded areas. The rack tabs fit exactly next
> to the hinges with no extra play what so ever so I can slide the pins through
> the tab holes but there is no way that I can get the
> tabs over the threaded area.
>
> Can someone tell me the sequence in which the luggage tabs should go on the
> pins. Or a couple of pictures would be great.
>
> Mark
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|