To be a little more specific:
The numbers are oriented so that they can be read sitting in the right-hand
seat and looking up and forward. They are on the wide horizontal portion of
the extrusion, and are on the far right of that surface, with the base of the
numbers up against the short vertical flange which takes the Furflex seal.
They start about 2" from the front of the extrusion, and come in three groups
separated by spaces, as in:
4/03 62 3565
Best regards
Peter
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|