healeys
[Top] [All Lists]

Re: [Healeys] Fw: Craftsman Tools

To: robertlarson@att.net
Subject: Re: [Healeys] Fw: Craftsman Tools
From: I Erbs <eyera3@gmail.com>
Date: Sun, 29 Aug 2010 09:27:03 -0700
second hand and pawn shops too

On Sun, Aug 29, 2010 at 8:57 AM, Bob <robertlarson@att.net> wrote:

> And don't pass up a rusty Craftsman tool at a yard sale or flea market. 10
> to 25 cents can get
> you a brand new one.
>
> I got a linesman pliers that could not be opened because of rust at a yard
> sale.   No questions
> asked when exchanged for a new one.
>
> Bob
>
> 55BN1
>
>
> On 8/29/2010 11:05 AM, Dick Matson wrote:
>
>> I recently found a Craftsman screwdriver on the highway.  There were no
>> black
>> skid marks around but the screwdriver had sure been run over some.  It was
>> in
>> rough shape.
>>
>> Not able to find it's owner I took it to the tool section of the Sears
>> store
>> saying this screwdriver is in pretty rough shape.  The store asked if I
>> wanted
>> a new one.
>>
>> Among some other-type tools Sears will not replace tape rules either now.
>>
>> Dick Matson / Bj8
>>
>>
>> ----- Original Message -----
>> From: Greg Lemon<mailto:glemon@neb.rr.com>
>> To: HealeyRick<mailto:healeyrick@yahoo.com>  ; 'Austin Healey
>> List'<mailto:healeys@autox.team.net>  ; 'Jonas
>> Payne'<mailto:jpayne@ThorCon.net>  ; JohnSims<mailto:ahbn6@verizon.net>
>> Sent: Sunday, August 29, 2010 6:42 AM
>> Subject: Re: [Healeys] Craftsman Tools
>>
>>
>> "Craftsman will no longer give you a "new"ratchet.  They will give you a
>>  "rebuilt" one.  At least you can still get a new BFScrewdriver, which I'm
>> sure
>>  none of us ever misused as a prybar to get an engine aligned into its
>> mounts.
>>  ;-/
>>
>>  Rick"
>>
>> Made me chuckle, I have taken in "BF Screwdrivers" that have obviously
>> been
>> used a not only as a prybar, but a chisel, with the plastic end banged all
>> to hell, no questions or comments no dirty looks, no paperwork or receipt
>> required they just give me a new one.
>>
>> heck of a deal, yes the new ratchets and some of the new tools are not as
>> high quality as the old ones, but if they fail sooner you can still take
>> them back again..and again.
>>
>> Greg Lemon
>>
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/eyera3@gmail.com
>



-- 
Ira Erbs
Portland, OR
   _______                                  _______
     (______ \____1960 BT7____/ _______)
         (_________________________)
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Healeys] Fw: Craftsman Tools, I Erbs <=