What works for me:
Front shocks: Grade 8 flatwashers under the bolt heads (no lockwashers), clean
threads, blue Locktite, torque to 35ft-lbs
Rear shocks: Grade 8 flatwashers under the bolt heads, lockwashers under the
nuts, (optional) Locktite, torque to 35ft-lbs
bs
--------------------------------
Bob Spidell - San Jose, CA
Was there a consensus, the last time this was discussed, on the
torque for the shock mount bolts? My original threads were in good
shape.
I want to put flat washers under the lock washers, so that the lock
washers don't dig into the alloy......opinions?
Stephen, BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|