I received the following from our friend, Ed Driver. The article on his site
to which he refers can be found at:
http://www.vintage-sportscar-touring.ca/technical/PCV.html
There are other very interesting items on his site that are good reads and
full of information.
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: E.A. Driver [mailto:edriver@sasktel.net]
Sent: Wednesday, July 28, 2010 1:20 PM
To: John Sims
Subject: Re: [Healeys] PCV valve- from Pep Boys
Hi John
I am truly amazed, this setup for a BJ8 with photos and measurements has
been on my web site for the last four years.
Keep up the good work mate
Kind regards
Ed
Saskatoon
>
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net
> [mailto:healeys-bounces@autox.team.net]
> On Behalf Of Bob Spidell
> Sent: Wednesday, July 28, 2010 12:04 PM
> To: Stephen Hutchings
> Cc: healeys@autox.team.net
> Subject: Re: [Healeys] PCV valve- from Pep Boys
>
> Use the smaller tapped and plugged hole at the rear of the manifold.
>
> bs
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|