Catch it before I'm left stranded. That makes sense. I'll start looking more
often.
Thanks
Greg
Sent from my iPhone so please excuse typos and brevity.
On Jul 22, 2010, at 10:07 PM, Bob Spidell <bspidell@comcast.net> wrote:
Greg,
The hole is an inspection port (really). Your water pump in all probability
has sealed bearings--no greasing required.
bs
Greg Mandas wrote:
Dan,
Sorry, I should have been more explicit. My water pump doesn't have a plug.
It's got a hole. It's on top and rather ragged looking, almost as if it were a
flaw in the casting. I can see into the pump between the pump and pulley
bearings.
I originally thought it was bad and ordered a replacement and there's that same
hole.
I guess I should put some greese in it. The whol;e is on top so I guess it'll
stay.
Greg
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|