That is actually how is it supposed to be done. Professional mechanics use
a tool that screws on top of a small (hand held) propane bottle with a hose
and a push button. Put the hose near the area you want to check for a
vacuum leak and push the button. Idle changes = leak.
This is far safer than the commonly use spray carb cleaner or WD-40 all over
the engine. I have seen more than one guy set an engine on fire that way.
On Tue, Jun 29, 2010 at 11:24 PM, Oudesluys <coudesluijs@chello.nl> wrote:
> Jezus, are you out of your mind, highly dangerous with sparks from the
> distributor around and possible blow back. Use a bit of WD40 instead, but
> still be carefull.
> Kees Oudesluijs
> NL
>
> Martin Jansen wrote:
>
>> A quick way to check for intake leak -while engine is running take a
>> welder's
>> torch or a propane torch turn the acetylene gas or propane gas do not
>> light,
>> run the nozzle around the carb connections and around the intake manifold
>> connections. If engine speed increase you have a leak.
>>
>>
>> Happy Healeying, Marty www.jule-enterprises.com
>> _______________________________________________
>> Healeys@autox.team.net
>>
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richard.ewald@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|