Guys
Has anyone got a picture of the wood trial fitted to the hood frame showing
the gaps around the window especially the rear edge please? I have just trial
fitted mine and the rear edge on the left door is level with the thin edge of
the glass (viewed from side of car)nand just about flush with the face of the
glass (viewed from rear of car). The right side is flush again on the rear
edge but the window is about 1/2" proud of the face of the glass (viewed from
rear again).
I cannot move the window in (by bending the rear runner frame)as the glass
just touches the rubber door outer seal (on chrome door top) and would still
leave the gap at the bottom if that makes sense).
I have a nice even gap at the top across the window on both sides ready for
the seals / ali cant rail.
I have not fitted the cant rails yet and still waiting for the correct grey
seal.
It looks like the window will fit recessed with the wood on the top and level
with the wood at the rear?
cheers Andy
_________________________________________________________________
http://clk.atdmt.com/UKM/go/195013117/direct/01/
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|