If the lines are steel you could have a cracked line, which is very
difficult to see, where it enters the cylinder. With the line fitting
tightened shoot some air into the top of the fitting where the line
enters. If you see brake fluid check the line for a crack.
John
At 10:15 AM 6/1/2010 -0700, Jonas Payne wrote:
>He and I have bench bled it, installed it on the car and tried to bleed it but
>consistently get air from both sides of the front. The rears are fine.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|