>From an electrical point of view there is not a "Positive" or "Negative"
diode. It
is a matter of installing it in the correct direction. That does not rule out
a
mechanical consideration if the leads have been cut to fit or a terminal has
been
crimped on, etc.. If all it is, is a diode with a little more information
Radio Shack
most likely would have a generic type that would work just fine.
Any readable numbers on the working one? Or a schematic somewhere?.
Bob
--- On Sat, 5/29/10, John Sims <ahbn6@verizon.net> wrote:
From: John Sims <ahbn6@verizon.net>
Subject: Re: [Healeys] SU Fuel Pump Problem
To: "'Jonas Payne'" <jpayne@ThorCon.net>, "'Healey List'"
<healeys@autox.team.net>
Date: Saturday, May 29, 2010, 5:58 PM
If you are referring to the diode, yes, they can be replaced and are listed
in the current Moss catalog but you have to specify whether you need a
positive or negative diode.
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Jonas Payne
Sent: Saturday, May 29, 2010 5:44 PM
To: Healey List
Subject: [Healeys] SU Fuel Pump Problem
The xk jag has 2 su fuel pumps installed that are exactly the same as the
one
on my healey.
One of the 2 is working, the other is not. The non working pump is one of
the
reproduction pumps, and the solid state "chip" under the plastic cover is
fried.
I don't see the chip in the moss catalog. Can it be replaced?
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|