Rich -
I am sorry to tell you this but probably sometime in the past someone
replaced your doors with doors from a BJ7. The doors are identical in
all respects except the shafts of the winow regulators are about a
half inch shorter.
You need to buy BJ8 window regulators. I don't know if a new batch
has been made by anyone, if not you'll have to get them used.
Some people weld extensions on the shafts, but I am not a fan of this solution.
Alan
On 4/30/10, Richard Kahn <tahoehealey@hotmail.com> wrote:
> I am having trouble with the window cranks on my BJ8 pushing the interior
> door
> panels inward, causing it to bow away from the bottom portion. This is
> occurring on both sides. I have just replace the panels due to the previous
> panels doing the same thing. The square shaft has two sets of holes and I am
> using the ones further inboard ( towards the seats). Can the whole window
> mechanism be moved in (towards the seats) 1/4 or more using washers or is
> there another way of adjusting the position of the window? I am using 1/8
> board and very thin foam.
> Thanks for any help.
> Rich Kahn
>
> _________________________________________________________________
> The New Busy is not the old busy. Search, chat and e-mail from your inbox.
> http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
> :en-US:WM_HMP:042010_3
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|