The quick answer is NO. The early 3000 calipers (type 14) have a distance of
3-1/4" between the mounting hole centers. The BJ8 calipers (type 16) are
3-1/2" center to center.
Having said that, one could plug the holes on the early 3000 caliper mounting
brackets, re-drill and tap the brackets for the BJ8 spacing. The early and
late rotors are the same diameter but the BJ8 rotors are 1/2' thick while the
early rotors are only 3/8" thick.
Richard Mayor
BN7L-466 Vintage Racer
Portland, Oregon
> From: e-wilkins@cox.net
> Date: Mon, 19 Apr 2010 09:27:18 -0700
> CC: Healeys@autox.team.net
> Subject: Re: [Healeys] BT7 Brake Calipers
>
> On the subject of BN7/BT7 type calipers, is there an available
> conversion to BJ8 type brakes that doesn't involve all new spindles
> and hubs?
>
> Thanks
>
> Wilko
> San Diego
>
> On Apr 19, 2010, at 8:19 AM, Jonas Payne wrote:
>
> > I need a set of rebuilt / core BT7 brake front brake calipers.
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/mayorrichard@hotmail.com
_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL
:en-US:WM_HMP:042010_3
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|