I agree, Rich, but when you buy a brand new aluminum gas tank from Limora,
like I did, and the tank turns out to be leaking, like I encountered, in
that case you (or better: me) was grateful that I had NOT sealed the
seam.........
Jack Aeckerlin, The Netherlands
1964 BJ8 29432
2010/4/16 Rich C <richchrysler@quickclic.net>
> We're sealing this joint from the inside. Inside the boot, and under the
> Armacord should NOT be a place where water can get to.
>
> Rich
>
> --------------------------------------------------
> From: "john spaur" <jmsdarch@sbcglobal.net>
> Sent: Thursday, April 15, 2010 11:31 PM
> To: <healeys@autox.team.net>
> Subject: [Healeys] Rear shroud at boot floor
>
> Are people sealing the seam inside the boot between the steel and aluminum
>> or leaving it unsealed to drain?
>>
>> TIA,
>> John Spaur
>> '62 BT7
>> _______________________________________________
>> Healeys@autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
>>
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/j.aeckerlin@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|