Thomas,
There is a small bracket that is about 1 1/2" long, with two holes, the
larger one for its mounting bolt, and the smaller hole for the return
spring. This bracket is fitted to the bell housing mounting bolt that is
positioned at about 7 o'clock (lower left area).
Rich
--------------------------------------------------
From: "T+ B Willig" <willig@wtnet.de>
Sent: Friday, April 02, 2010 9:11 AM
To: <Healeys@autox.team.net>
Subject: [Healeys] Clutch return spring BN2
> Hello,
>
>
>
> the clutch return spring of the BN1/2 is attached to the clutch lever on
> one
> side and to ???? on the other side.
>
>
>
> Please advise
>
>
>
> Regards
>
>
>
> Thomas Willig
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|