healeys
[Top] [All Lists]

Re: [Healeys] Electrical Short....need help

To: "'edic'" <edic@tampabay.rr.com>, <healeys@autox.team.net>
Subject: Re: [Healeys] Electrical Short....need help
From: "John Sims" <ahbn6@verizon.net>
Date: Sun, 28 Mar 2010 10:33:11 -0400
You can also see my installation of a mechanical switch that I purchased
from Watson's on the Technical page, My Modifications section of my site. At
the same time that I installed the mechanical switch, I installed a third
brake light and converted the reflectors to brake lights. These work with
the mechanical switch and the original pressure switch works the original
brake lights so I effectively have two brake light systems and hopefully if
one fails, the other will not.

John Sims, BN6
Aberdeen, NJ
 
http://www.healey6.com


-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of edic
Sent: Sunday, March 28, 2010 9:58 AM
To: healeys@autox.team.net
Subject: Re: [Healeys] Electrical Short....need help

Paul,



My brake light switch went out and I decided to replace it with a mechanical

switch.  I especially like the feature that I can adjust the brake lights to

come on with the slightest pressure of drepressing the brake pedal. I think
the sooner the brake lights come on the sooner the tailgater can start
stopping. The switch was fairly easy to install except for working in the
foot well and I had to make a small bracket to hold the switch. Drilling a
couple of holes in the foot well was cumbersome, at least for me, and the
retro took some time, but I am happy with the results.

I got the idea for the mechanical switch from Lin Rose's wonderful Healey
restoration site, "THE BLOODY BEAST" AH 3000 MK I, listed under Brakes.  The

picture of the instillation sealed the deal for me as I am visual and I
thought this is something I can do. He also had a picture of the switch and
the company to call to order it. I called Watson's StreetWorks and they were

a pleasure to deal with.  The switch was $22 plus shipping and came within a

few days.

http://web.mac.com/linwoodrose/My_AH_3000_BT7_/Home.html

 My original brake switch is located just beneath the rear horn and I did
not remove it, just added wires to go to the new switch.

This was my experience FWIW.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>