3/8" OD, 0.035" wall - McMaster Carr (http://www.mscdirect.com) I used
the 304SS welded tubing for mine, PN 01412311. There's seamless or
other materials (1010, 4130, etc).
Remember to round the bottom of the slot to remove the stress riser
caused by the slotting saw.
john spaur wrote:
> I checked the archives but was not able to answer my question.
>
> Mine is cracked a the bottom of the adjustable slot and I was wondering
> if the stator tube material a standard diameter and wall thickness that
> can be found at a steel supplier?
>
> Thank you in advance.
> John Spaur
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|