Re: [Healeys] Brake booster won't release

[Alan Seigrist <healey.nut@gmail.com>]

Oh wait - are you using an aftermarket unit, or the original Girling
unit but rebuilt?



On 3/28/10, 2x2doc@gmail.com <2x2doc@gmail.com> wrote:
> I'm redoing the brakes on my 1959 BT7. I've replaced the brake lines and
> added a Powertune brake booster. I bled the brakes using an Ezeebleed
> system. The problem is that the booster won't release once I've applied the
> brakes (it eventually releases but can take a couple of minutes) I've
> mounted the booster just like the instructions say. The brakes work fine if
> I disconnect the vacuum line (and plug the manifold). I've bled the brakes
> numerous times and it always hangs up. Anyone have any ideas?
> Pat Williams
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>

-- 
Sent from my mobile device

Alan

'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums