I shall leave work and go try it. Back to you in 2 hours or less - JRC
--- On Wed, 3/24/10, Steve B. Gerow <steveg@abrazosdata.com> wrote:
From: Steve B. Gerow <steveg@abrazosdata.com>
Subject: [Healeys] BJ8 suspension thoughts
To: "healeys@autox.team.net" <healeys@autox.team.net>
Date: Wednesday, March 24, 2010, 8:54 PM
I always thought it was cheap of BMC to get rid of the panhard rod on the
BJ8.
However, when I installed my BJ8 radius arms on my car, I noticed they're
quite rigid in sideways motion. Since my car has front mounts per Mike
Salter's AHX-12 design which will flex sideways but not other directions, it
still requires the panhard rod.
The front and rear radius arm mounts on the BJ8 are rigid in a sideways
direction, therefore I would assume the BJ8 axle has little tendency to shift
sideways. Ditto the Sprite which has a similar radius arm design.
I wonder if anyone's tried moving the BJ8 axle sideways with the radius arms
attached but the springs disconnected.
Enquiring minds want to know.
Hey - _who_ has too much time on their hands? Not me.
--
Steve Gerow
BN6
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/f9cougar@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|