Re: [Healeys] healboard lift a dot fastener position bj8

[warthodson@aol.com]

Rich,
That is a great tip. Thanks for sharing it.
Gary Hodson



I also use a small hole punch chucked in my electric drill to cleanly cut
hrough carpet underlay and the underfelt paper when installing the male
arpet snaps into the floors, etc. Nothing to catch and twist up, nothing to
nravel, just a clean hole through the materials.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums