The two longer bolts are put on the left side under each manifold
drain pipe. Then there is a little bracket which attaches to the bolt
to hold the drain pipes in place - actually quite importatnt to keep
the copper pipes from work hardening and falling off. You can buy the
little drain pipe brackets from the Nocks at BCS....
On 3/22/10, Stephen Hutchings <s.hutchings@rogers.com> wrote:
> I have two silly questions about the small bolts that hold the sump
> on, so bear with me.
>
> What is the correct position for the two longer bolts?
> Should the special elongated washers be placed as if they have a
> spring action (they have a bow to them) , or should they sit the
> other way, without tension, the way they were when I took them off?
>
> Thanks,
>
> Stephen, BJ8
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|