John,
Pop rivets were not used to fit the shroud to the rear hoop. They were flat
head solid 1/8" shank rivets both into the rear hoop and to fasten the
shroud to boot floor flange. All the rivets are described in the body
section of the original workshop manuals. However 3/16" aluminum pop rivets
were used elsewhere as detailed in the manuals.
Rich
--------------------------------------------------
From: "john spaur" <jmsdarch@sbcglobal.net>
Sent: Saturday, March 20, 2010 2:10 AM
To: <healeys@autox.team.net>
Subject: [Healeys] Shroud upper rivets
> I took photos but the contrast washes out the detail !#??!!#
>
> Are pot rivets used to secure the shroud to the chassis hoop?
>
> 1/8" rivets?
>
> TIA,
> John Spaur
> '62 BT7
>
> "I really did take photographs!"
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|