A few years ago, there was a thread on this with a solution....I used it and
it worked great.
Take two small springs (I got mine out of a couple of pens) and insert them
where the choke cables attach to the carb (one spring for each choke
cable)...in a manner that the cables push against the carb choke levers.
These springs will ensure that when you push the choke know in, the cables
push away from the lever on the carb....works like a charm.
Hard to describe but, once you look at the carb set-up, you'll see what I'm
saying.
Paul
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Frank Edwards
Sent: Sunday, March 14, 2010 6:54 AM
To: healeys@autox.team.net
Subject: [Healeys] BJ 7 choke
Finally started my engine after many years and a rebuild.
I noticed that when you push the choke knob back in the choke plates stay in
the choked position. The only springs I see are the two on the sides of the
carbs and these are obviously not returning the plates to the non- choked
position. Are there supposed to be more springs or am I missing something
else?
Thanks for your help.
62' BJ7
61' Bugeye
69' Midget
Frank R. Edwards 570-784-4662 logical2@hotmail.com
_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID27925::T:WLMTAGL:ON:W
L
:en-US:WM_HMP:032010_3
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/healeys/britishcars@shaw.ca
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|