Mark,
Can't you build up using black coloured epoxy and dress it to its
original shape? Epoxy will adhere to bakelite very well.
I have used the method in the past with succes, although they were
other, radio, items.
Kees Oudesluijs
NL
Mark Schneider schreef:
> Listers,
>
> I am seeking a source for replacement of a trafficator component. The
> item in question is the "center switch plate". I may have the part
> name incorrect but it is the black bakelite disc in the center of the
> trafficator assembly which serves to retain the signalling lever
> either left or right until the wheel is again returned to the center.
> At the center of the bakelite disc is a small "v" which serves to
> retain the signal requested until the turn is completed The top edges
> of the "V" have become heavily worn and the replacing the whole disc
> would be the best fixl if a source of them can be found. Thank you.
>
> Marks 3
> '66 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 9.0.733 / Virusdatabase: 271.1.1/2661 - datum van uitgifte: 02/01/10
>08:35:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|