As a point of trivia, heliarc is TIG (or GTAW). Originally, helium was used as
the shielding gas--and still is in some
applications (sometimes aluminium)--but nowadays it's usually argon or an
argon-CO2 mix.
Bet your welder was an 'old timer.'
bs
redlands ron davies wrote:
> Roland,
>
>
> I had a shop in Yucaipa repair my shrouds on the modified. He used
> Heli-arc, or is that Heliarc, method. ( Maybe it should be Healey-arc ? ) No
> problems to date and that has been ten years.
>
>
> Cheers
> Redlands Ron
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|