Alan
I agree that only UNF grease nipples were used on 100s except perhaps
the odd very early one.
As I said in my previous email 1" long versions are too short because
the side cheeks of the mounting assembly do not then allow a standard
'lock on' grease gun fitting to attach. A tapered version that does not
clip over but relies on the pushing pressure to stay in contact will
work but these often leak.
>
>I was under the impression that was a UNF nipple? I thought the only BSF on
>a 100 was on the motor and gearbox, no where else....
>
Also on the spiral bevel rear axle, BN1 front suspension and steering
and part of the rear suspension.
Regards
>Regardless, you can get a BSF replacement from one of my all time favorite
>cottage industry type suppliers, Tim Hodgekiss in the UK. He has a 1" BSF
>nipple (part #831) here:
>
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|