Hi Pieter
I also had a 1"master cylinder on the BN1 with BJ8 front discs (though not
tandem system) and had a hard pedal even with a PBR VH44 booster. Not a good
feeling. Went to 7/8" and now works well
John Rowe Qld Australia
BN1 BT7
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Pieter and Linda
Sent: Friday, 18 December 2009 1:47 AM
To: Alan Seigrist
Cc: Healey Mailing List
Subject: Re: [Healeys] Dual Brake System
I have the wilwood 1" bore tandem master cylinder in my BJ7 combined
with four pot front calipers and rear discs. It is a straight bolt in
fit and easy to plumb but the pedal pressure is high. I would recomend
a 7/8 bore. I am fitting a tandem brake booster over the winter so we
will see what the pedal pressure is like then,
cheers
Pieter
did see a Healey at Encounter in 2008 that had converted to a Dual
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|