I am doing a final alignment tweak on my Bt7. First off I need to get the
tires aligned with each other. Can some one give me a good rule of thumb
as to how much movement a tire will make with one full turn of the the cross
bar tie rod end. I have the drivers tire where I want it and now I need to
bring the passenger side in a bit to match up with the drivers side.
One screw thread certainly doesn't cover much distance so I am thinking that 2
turns of one of the cross rod ends would move a tire inward or outward about
1/16th of an inch.
Does any one have any sound figures on this adjustment.
After I get the tires aligned with each other I know that I can just turn the
cross bar one way or the other to adjust the tires in or out.
Thanks, Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|