I took a bent lever to my local machine shop (owner has his aircraft
mechanic's certificate) and for $35.00 and a good hydraulic press, they
were able to bend it back exactly to original configuration. I had taken
them another good one for accurate measurements and they got it to within a
few thousandths of an inch.
Rich Chrysler
----- Original Message -----
From: "T+ B Willig" <willig@wtnet.de>
To: <healeys@autox.team.net>
Sent: Friday, December 04, 2009 4:35 PM
Subject: [Healeys] Looking for a BN2 rh steering lever
> After long measuring, comparing the lft side of the steering to the right
> side, aided by some members of the list, I found out that my rh steering
> lever on my 100 BN2 is seriously bend inwards. Is someone on the list able
> to help me with a good s/h unit? I have shipping addresses in the US and
> in
> Europe were the part could be send. So don't be scared off about shipping
> issues.
>
>
>
> Thomas Willig
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|