Picture too small to make any sense out of.
The carb is identical to the ones off my early BT7(one fitted with thermo
chokes). The 4 screws denote a diaphragm. The H6 have an adjustable jet with
a brass nut which moves the jet up or down
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Eric (Rick) Wilkins
Sent: Tuesday, 1 December 2009 8:46 AM
To: Healeys List
Subject: Re: [Healeys] 100-6 HD6 Carb?
I know it's not an HD6. Notice the extra stuff under the diaphragm
housing.
It looks more like an H6. Like these:
http://www.bobs-services.de/archiv/su_h6_jagxk120_80.jpg
Look at the very bottom under the diaphram housing.
On Nov 30, 2009, at 1:46 PM, John & Kerry Rowe wrote:
> The carb is a HD6 . I believe the "d" stands for "diaphragm". They are
> interchangeable from side to semidown by use of different float bowls.
> John Rowe
> Qld Australia
> BN1 BT7
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net
[mailto:healeys-bounces@autox.team.net
> ]
> On Behalf Of Eric (Rick) Wilkins
> Sent: Tuesday, 1 December 2009 3:33 AM
> To: dwflagg
> Cc: healeys@autox.team.net
> Subject: Re: [Healeys] 100-6 HD6 Carb?
>
> IMHO, That carb is as listed.
>
> An HD6 is angled. Supposedly the "d" means downdraft (semi).
>
> On Nov 29, 2009, at 3:23 PM, dwflagg wrote:
>
>> Look at eBay item #180437624761. It is listed as an HS6, but has the
>> bowl
>> attached with 4 bolts and looks like an HD6. If you need one, that
>> may be
>> it. The usual disclaimer of having no financial interest, etc..
>>
>> Doug
>> ____________________________________________________________
:
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|
