Try turning your engine around;). Actually if is was 180 out and
pointed at the wrong pidton when installed you would have this
situation. Maybe had 6 at tdc not 1 on instAll
I Erbs
Sent from my iPod
On Nov 26, 2009, at 10:03 AM, "Attean Lake Lodge"
<info@atteanlodge.com> wrote:
> How can a distributor be 180 degrees off? with my engine at 15
> degrees BTDC
> the rotor is pointing at #6 instead of #1. The drive is at the
> correct "20 to
> 2" position and the offset on the drive dog only allows it to be
> fitted one
> way. Many thanks and Happy T-day.
>
> Brad Holden
> 67 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as eyera3@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|