Ed -
If the holes don't have the striations in them, I'd say you need to just
used normal high strength bolts on this rather than the healey tapered
studs. Otherwise, you won't be able to get the studs in...
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
On Wed, Nov 25, 2009 at 10:37 AM, Ed Woods <fogbro1@comcast.net> wrote:
> Hello List,
>
> I have two new front 12tpi hubs for my BN6 which I'm converting to BT7 disc
> brakes. The old BT7 hubs are fastened to the rotors with a splined stud and
> nut, the hub being countersunk to accept the taper at the stud's head. The 5
> holes in the new hub are not countersunk.
>
> The question is: Do I have these holes countersunk at my local machine ship
> to accept the old studs or will the bolts as used on the late BJ8s fit?
>
> TIA,
>
> Ed Woods _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|