Michael -
I repaired my sender unit, which had corroded around the contact from
galvanic corrosion, reducing part of the casing to aluminum vapor. I
repaired it using JB Weld. Looks just like aluminum and will last forever
and is a natural insulator.
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
On Thu, Nov 12, 2009 at 10:17 AM, michel Murphy <michel.murphy@gmail.com>wrote:
> Hi all,
>
>
>
> I broke the brass bolt used for the electrical connection on my sender
> unit.
> When I removed the original bolt, it was wrapped in what looked like a wax
> coated gauze material. I figure that this wrapping insulates the two ends
> of the variable resistor from each other and acts as a weather seal. My
> question is what can I use to replace this seal?
>
>
>
> Thanks in advance.
>
>
>
> Mike
>
> '63 BJ7
>
> Ottawa, ON, Canada
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|