I checked the thread on a SFT 576 and as Michael Salter said it's 5/8 26 TPI
British Standard Brass ... Norman Nock
--- On Sun, 10/25/09, Michael Salter <msalter@precisionsportscar.com> wrote:
From: Michael Salter <msalter@precisionsportscar.com>
Subject: Re: [Healeys] Lucas SFT 576
To: pennell@cox.net, "'dwflagg'" <dwflagg@juno.com>, healeys@autox.team.net
Date: Sunday, October 25, 2009, 5:44 AM
I think you will find that it is actually 26 t.p.i. being BSC British
Standard Cycle Thread
http://homepages.tesco.net/~A10bsa/bscbot.htm
Michael Salter
http://www.netbug.net/blogmichael/?p=445
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of pennell@cox.net
Sent: Saturday, October 24, 2009 9:59 PM
To: dwflagg; healeys@autox.team.net
Subject: Re: [Healeys] Lucas SFT 576
Hi Dougie,
I am missing a nut for the same light. A while back I was reasearching it
and I seem to recall I found it was 5/8 by 27 tpi. Somewhere I was told
that a number of brit motorcycles used the 27 tpi. I never found a nut.
Keith
---- dwflagg <dwflagg@juno.com> wrote:
> Does anyone know the thread size on the Lucas SFT 576 for the securing
> nut.? TIA.
>
> Doug
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as sjnnock@sbcglobal.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|