Re: [Healeys] Smell

[Oudesluys <coudesluijs@chello.nl>]

Use a new soft red copper sealing ring (or if used heat to cherry red 
and cool it in cold water) if it is a flat sealing area. If it is the 
old gas type conical thread use Teflon/PTFE tape as used by gas/water 
fitters.
Kees Oudesluijs
NL


robertduquette@sympatico.ca schreef:
> Well, I'm not doing too badly then.  It's definately leaking from the front,
> but not down the sides.  Of course from there it blows back ... perhaps.  It
> doesn't appear to be a big leak.  The gearbox/OD does appear to be leaking
> from the low points.  If it's the drain plugs, the best cure is ...?
>
>
>
> Thanks!
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive