Everyone should have at least 1 sachet of brake rubber lube. It does last
forever and the options
ruin any paint work that was done on the calipers. If all else fails,
split the calipers, use new bolts,
torque to 35ft lb and install a new square edged rubber seal between the
halves. The archives should have a ton on this one.
Mark
----- Original Message -----
From: "Alan Seigrist" <healey.nut@gmail.com>
To: "Oudesluys" <coudesluijs@chello.nl>
Cc: "George Vernau Sr." <gvernau@containerhouse.com>; "Healey List"
<healeys@autox.team.net>
Sent: Sunday, September 27, 2009 7:57 AM
Subject: Re: [Healeys] caliper rebuild
> Kees -
> You're right about the corrosion, but George bought SS pistons so it
> shouldn't be an issue. The old chrome plated ones would go, but the SS
> ones
> are much better.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|