(Different) Ed,
With a PCD of 4.5inches the distance between the stud centres is around
3.17ins
With a PCD of 5 inches the distance between the stud centres is a tad over
3.54ins
If you want a really accurate measurement let me know and I'll do the
add-ups and take-aways instead of a quick scaled drawing.
Guy R Day
----- Original Message -----
From: "Ed Woods" <fogbro1@comcast.net>
To: <healeys@autox.team.net>
Sent: Friday, September 11, 2009 1:05 AM
Subject: [Healeys] Bolt-On Wheels again
> List,
>
> My 100-6 arrived today. It hasn't run since 1972, so I have a long road
> ahead before I become, once again, a Healey driver.
>
> I measured the distance between two adjacent wheel studs and determined
> that the bolt circle is 4.5" One of the wheel manufacturers quoted a wheel
> with a B.C. of 5". Can anyone confirm either measurement??
>
> Also, is there a 100-6 owner out there with a web site from which I could
> learn more about this particular series?
>
> I have a factory manual that I bought in 1966 for my BT7. Is there
> another, different, factory manual for the 100-6? Any other books that I
> should have on hand that'll tell me how to orient each Phillips head screw
> on this car??
>
> Thanks,
>
> Ed Woods _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as grday@btinternet.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|