Charlie is correct--if you look at any pictures of the hardtop on AHX12
you'll see that the "Domes" do not go all the way across the width of the
top and do not increase clearance for bar height but are rather there to
provide clearance for the helmets--a pretty clear indication that the 2" rule
will be a problem for you.
I'll be happy to measure the floor to inside of top dimension of my 100
with the NICAL top fit once I reinstall it which I will probably do in the
next few weeks. You won't find any NICAL tops bumping around and they are
expensive. Some other UK suppliers--The Cape and Pete Farmer--also sell
similar or identical tops.
Best--Michael Oritt
----------------------------------------
In a message dated 9/2/2009 9:20:12 P.M. Eastern Daylight Time,
cbaustin@verizon.net writes:
Even the top Mike Salter has modified with the bumps won't meet those
requirements.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|